• <span id="milsa"><sup id="milsa"></sup></span>
    <ol id="milsa"></ol>
  • <optgroup id="milsa"></optgroup><optgroup id="milsa"></optgroup><track id="milsa"><em id="milsa"></em></track>

      <cite id="milsa"></cite>


      UTK Displacer Level Controller (High Pressure)

      The high-pressure level switch is a displacer drive unit, which uses a single switch assembly for level alarm or control. These devices are designed for liquids with working pressures up to 250 bar and specific gravities of 0.40 and above. A permanent magnetic sensor is attached to the rotary switch drive. When the float/displacer rises correspondingly with the rise of the liquid, the corresponding sleeve will move into the range of the magnetic sensor and cause the switch to act accordingly.

      Contact Us


        1.Chamber material can choose 304 or 316 stainless steel

        2.The pressure can be up to 16MPa

        3.Temperature can be up to +300° C

        4.The lowest specific gravity is 0.40

      Main Technical Parameters

      Nominal pressure: ≤16.0MPa

      Accuracy: Level control: ±4mm

      Interface control: ±6mm

      Flange standard: HG/T20592-2009,HG/T20615-2009 or on request

      Ambient temperature: -40℃~+80℃

      Medium temperature: -40℃≤T≤+150℃ (high temperature: T≤300℃)

      Density: Level control: ρ≥0.5g/cm3

      Interface control: ρ1-ρ2≥?0.25g/cm3

      Viscosity: ≤1St(10-4m2/S)

      Wetted material: 20, 304, 316L or on request

      Power inlet: G1/2” (inner thread) or on request

      Explosion-proof type: Flameproof?ExdⅡCT1~T5/T6 Gb

      Intrinsic safety: ExiaⅡCT1~T5/T6 Ga

      Functional safety level: SIL 2


      Refining: Crude oil storage, crude oil desalination

      Chemical: Buffer tank

      Electricity:?Boiler sewage tank, condensate storage, flash tank, pre-flash tank


      Related Products


    1. <span id="milsa"><sup id="milsa"></sup></span>
      <ol id="milsa"></ol>
    2. <optgroup id="milsa"></optgroup><optgroup id="milsa"></optgroup><track id="milsa"><em id="milsa"></em></track>

        <cite id="milsa"></cite>